Components – Elate Carbon MW-6

Aud. RRP $2,110*

Sold in pairs.

Elate Carbon MW6

Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next level performance in mind. These new drivers get their Carbon moniker from their triple layer cones from which they are derived, consisting of two layers of carbon fiber sandwiching a Rohacell foam core. These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.

Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion.  which translates to highly transparent and bass-rich sound reproduction.

Few speakers can match the midrange purity and rich bass performance of the Elate Carbon Pro woofers.

Info Centre

 

Reference SeriesMW6
ConfigurationMidbass Woofer
Power Handling180 W/RMS Max. 1000 W/RMS
Nominal Impedance4 ohms
Sensitivity87 dB
Frequency Resp.30- 4,000 Hz
Resonant Freq. FS Hz45
Voice Coil Size75 mm
Voice Coil Height14.5 mm
Voice Coil FormerTitanium
Voice Coil WireHexatech aluminium
DC Resistance3 6 ohms
Voice Coil Induction0.615 @ 1 kHz (mH)
Magnet SystemDouble Magnet Rear Vented
HE-Magnetic Gap Height5 mm
B-Flux Density (T)0.75
BL Product /BXL6.51
Max Linear XMax+/- 4.75 mm
Magnet SystemNeodymium Rear Vented
Suspension Compliance CMS0.67 mm
Electrical Q Factor QES0.47
QTS0.43
QMS7.19
Mech. Resist.RMS-N.S/M1
MMS (Grams)18
Equiv. Can Air Load VAS-L13.3
Effect. Piston Area SD sq.cm120
Cone TypeOne-piece formed
Dome MaterialDPC
Unit Diameter165 mm
Mounting Depth61 mm
Mounting Cutout141 mm
Net Weight1.05 Kg
Speaker GrillsLotus Grills Included

 

 

CARBON FIBER CONE

Derived from the drivers of our award-winning fat lady speaker system, this cone design is comprised of two exterior carbon fiber skins sandwiching a layer of Rohacell, a high strength, featherweight foam. The combination forms a cone that is light, strong and properly damped for naturally uncolored audio reproduction.

LOTUS GRILLE

Inspired by the Lotus flower, engineered to offer an acoustic transparent solution to protect the loudspeakers whilst offering a beautiful design element. The specific pattern minimizes the “horn” effect found in traditional grilles.

The Lotus grille is a registered design protecting Morel’s intellectual property.

NEODYMIUM MAGNET

The most powerful magnet available, neodymium enables Morel to create physically compact speakers, such as tweeters and midrange, that fit in very limited spaces without limiting the quality of sound.

Related Products

MXT-280C Crossover

Optional 2-way Crossover to suit
Elate Carbon Pro & Elate Carbon.

MXT-380C Crossover

Optional 3-way Crossover to suit
Elate Carbon Pro & Elate Carbon.

MT450 Tweeter

As used in the Elate Carbon

*Prices correct at 01/02/2024 and are subject to change.