Elate Carbon MW9
Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next level performance in mind. These new drivers get their Carbon moniker from their triple layer cones from which they are derived, consisting of two layers of carbon fiber sandwiching a Rohacell foam core. These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.
Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion. which translates to highly transparent and bass-rich sound reproduction.
Few speakers can match the midrange purity and rich bass performance of the Elate Carbon Pro woofers.
|Power Handling||200 W/RMS Max. 1000 W/RMS|
|Nominal Impedance||4 ohms|
|Frequency Resp.||25 - 3,000 Hz|
|Resonant Freq. FS Hz||44|
|Voice Coil Size||75 mm|
|Voice Coil Height||14.5 mm|
|Voice Coil Former||Titanium|
|Voice Coil Wire||Hexatech aluminium|
|DC Resistance||3 6 ohms|
|Voice Coil Induction||0.615 @ 1 kHz (mH)|
|Magnet System||Double Magnet Rear Vented|
|HE-Magnetic Gap Height||5 mm|
|B-Flux Density (T)||0.74|
|BL Product /BXL||5.15|
|Max Linear XMax||+/- 4.75 mm|
|Magnet System||Neodymium Rear Vented|
|Suspension Compliance CMS||0.36 mm|
|Electrical Q Factor QES||0.61|
|Equiv. Can Air Load VAS-L||30.9|
|Effect. Piston Area SD sq.cm||219|
|Cone Type||One-piece formed|
|Unit Diameter||222 mm|
|Mounting Cutout||192 mm|
|Net Weight||1.42 kg|
|Speaker Grills||Lotus Grills Included|
*Prices correct at 26/07/2021 and are subject to change.